ELGIN KEY & LOCK CO., INC.

Security specialist and locksmiths 

Serving the Elgin, Illinois Area Since 1933

 

PDQ XGT SERIES

Up

Sales Dept:

Vince  Forbes

Mike  Knott

Service Dept: 

  Clark Houghtby

Telephone:

847-742-7006
FAX:

847-742-1315
Postal address:

201 N. Spring St., Elgin IL 60120

* * * * CHRISTMAS SAFE SALE ! ! ! !     All safes in stock at least 10% off,  most safes 15-20% off, selected safes new & used 25% off!!   --  mention this banner and get an additional 5% through December 23, 2000.

Security specialist and locksmiths 

 

XGT Architectural Specifications

Lockset will be XGT (Super GT) series SPIRIT from PDQ Industries, Inc. Leola, Pennsylvania, Made in U.S.A. with a ten year manufacturer's limited warranty, and be certified to ANSI/BHMA A156.2-1996, Series 4000, Grade 1. Windstorm Resistant Product Listed - ANSI A250.13-2003, ASTM E1886-02, ASTM E330-02. Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 1485lbf. Locksets shall be listed by U.L./U.L.C for ratings of "A" (3 hours) label and less for single doors up to 4'0" x 8'0". Levers to be solid cast, with no plastic inserts, minimum 5-1/2" overall length with supportive spring power totally independent of chassis or latch unit. Latchbolt to be minimum 9/16” throw and requires only 41° rotation of levers for full retraction. Lockset fasteners to be concealed with through-the-door through-bolt attachment outside the 2-1/8” door prep, exceeds 3000 in lbs. of torque resistance.

 

 

 

XGT Lock Specifications 

 
FOR DOORS: 1-3/4" to 2 1/4" thick. Factory adjusted for 1-3/4".
DOOR PREP: Fits standard 161 door prep. Through-door thru-bolting.
BACKSET: 2-3/4" only. Guarded.
CASE: Heavy duty zinc diecast, investment cast and chromated cold rolled steel mechanism. Billet steel spindles.
FRONT: Stainless steel, wrought brass, or wrought bronze. 2-1/4" x 1-1/8". Beveled 1/8" on 2".
ROSE: 3-3/8" diameter.
STRIKE: 4-7/8" x 1-1/4"(ASA). "T" or "FL" Strike optional. Stainless Steel, wrought brass or wrought bronze.
LATCHBOLT: 9/16" Throw. Adjustable front for flat or beveled doors.
HAND: Non-handed
TRIM: PHL, BSN or MIA levers are solid zinc diecast. 41° lever rotation. Wrought brass roses. Concealed screws.
KEYS: Two (2) change keys per lock.
KEYWAYS: Available for all keyways of most major manufacturers
INTERCHANGEABLE CORE: Available for all keyed functions 6 or 7-pin.
CYLINDER: Brass 6-pin insert cylinder keyed to 5-pins
KEYING: Can be MK, CMK, GMK. Available Zero bitted (KO), Keyed Different (KD), Keyed Alike (KA). Can be keyed into existing master key systems of other manufacturers.
FINISHES: US3 (605), US4 (606), US10 (612), US10B (613), US26 (625), US26D (626)
U.L. LISTED: Listed for "A" label (3 hour) single swing doors(4'0" x 8'0").
CERTIFICATIONS: Complies with ANSI A156.2, Series 4000, Grade 1. Meets all applicable accessibility requirements of the ADA. U. L. Listed. BHMA.
 
Image Image Image 
 
Send mail to Customer Service with questions or comments about this web site.
Copyright © 2001 - 2006 Elgin Key & Lock Co., Inc.
Last modified: January 27, 2010