ELGIN KEY & LOCK CO., INC.

Security specialist and locksmiths 

Serving the Elgin, Illinois Area Since 1933

 

UL RSC RATING

Up

Sales Dept:

Vince  Forbes

Mike  Knott

Service Dept: 

  Clark Houghtby

Telephone:

847-742-7006

FAX:

847-742-1315

Postal address:

201 N. Spring St., Elgin IL 60120

* * * * CHRISTMAS SAFE SALE ! ! ! !     All safes in stock at least 10% off,  most safes 15-20% off, selected safes new & used 25% off!!   --  mention this banner and get an additional 5% through December 23, 2000.

Security specialist and locksmiths 

U.L. Burglary Rating Classification

Classification TL-15:

Signifies a combination-locked safe designed to offer a limited degree of protection against attack by common mechanical and electrical hand tools and any combination of these means.

Construction Requirements

bulletU.L. listed Group II, 1 or 1R combination lock.
bullet750 lbs. minimum or comes with instructions for anchoring in a larger safe, concrete blocks or on the premises where used.
bulletBody walls of material equivalent to at least 1" open hearth steel with a minimum tensile strength of 50,000 P.S.I.
bulletWalls fastened in a manner equivalent to continuous 1/4" penetration weld of open hearth steel with minimum tensile
strength of 50,000 P.S.I.
bulletOne hole 1/4" or less, to accommodate electrical conductors arranged to have no direct view of the door or locking mechanism.

TL-30:

Signifies a combination-locked safe designed to offer a moderate degree of protection against attack by common mechanical and electrical hand tools and any combination of these means.

Construction Requirements

Same as TL-15

Performance Requirements

Successfully resist entry* for a net working time of 30 minutes when attacked with common hand tools, picking tools, mechanical or portable electric tools, grinding points, carbide drills and pressure applying devices or mechanisms, abrasive cutting wheels and power saws.

* Entry=Safes classed as TL-15 — opening the door or making a six square inch opening entirely through the door or front face. Safes classed as TL-30 — opening the door or making a six square inch opening entirely through the door or front face.

Performance Requirements

Successfully resist entry* for a net working time of 15 minutes when attacked with common hand tools, picking tools, mechanical or portable electric tools, grinding points, carbide drills and pressure applying devices or mechanisms.
U.L. Label —Burglary Classification

 
Send mail to Customer Service with questions or comments about this web site.
Copyright © 2001 - 2006 Elgin Key & Lock Co., Inc.
Last modified: January 27, 2010